Series MPV – electric chain stainless steel double link

Series MPV – electric chain stainless steel double link

Aluminium bodied electric chain window opener with pivot bracket and selectable strokes, over the 5 standard selectable strokes supplied by factory, the motor is also equipped with an innovating function: the “U” position. This function allows the user to regulate a new needed stroke of the chain in a range from 12 to 400 mm.

Actuator with stainless steel double link chain.

Available on 24V d.c. and 230V a.c. versions, force 300N.

The motori s supplied with 1200mm of cable.

Supplied complete with pivot brackets.

Bottom hung fixing brackets available separately.

The motor is also equipped with the safety function that reduce the force during the close operation in the last 5 cm.

MPV USER MANUAL

AFTER SELL MANUAL

SELECT COLOUR AND VOLTAGE TO SHOW THE SKU

Clear Selection
SKU: N/A Categories: ,

LINEAR ACTUACTOR: FOR LOUVRES, SKYLIGHTS AND DOMES

Chain actuator: for bottom hinged windows (hinges on the bottom side, inside opening); for top hinged windows (hinges on the top side outside opening)

Linear actuator: for louvres, skylights and domes

To calculate the window opening and closing force please refer to the following semplified formulas
remember that 1 N (Newton) is about 0.1 kg (kilograms)

Operating voltage24V d.c. and 230V a.c.
Available strokes150 – 250 – 300 – 350 – 400 mm
Programmable strokes (“U” position)12 – 400 mm
Maximum tensile load300N
Maximum thrust load300N
Power18W
Time to travel (400mm)35s
Connection1200mm cable
Duty time20%
No load speed12mm/s
Temperature range (°C)-15° +70°
ProtectionIP42
Push points1
Electronic control speedYes
SinchronisationYes (optional)
Link adjustment of moving partAutomatic
Parallel connectionYes
Double insulationYes
Safety functionYes
Dimensions35x53x470

ACTUATOR FORCE (F) FOR VERTICAL WINDOWS

Force calculation example

F = (WINDOW LEAF WEIGHT /2) X (ACTUATOR STROKE / WINDOW LEAF HEIGHT)

WINDOW LEAF WEGHT (P) = 100 kg

ACTUATOR STROKE (C) = 250 mm

WINDOW LEAF HEIGHT (H) = 1000 mm

THE REQUIRED FORCE (F) IS:

F= (P:2)X(C:H)

F= (100 : 2) X (250 : 1000) =

12.5 kg (125 N)

ACTUATOR FORCE (F) FOR HORIZONTAL WINDOWS

Force calculation example

F = WINDOW LEAF WEIGHT / 2

WINDOW LEAF WEIGTH (P) = 100 kg

THE REQUIRED FORCE (F) IS:

F= P: 2

F= 100 : 2 = 50 kg (500 N)

YOU MAY ALSO LIKE...

You may also like…