SERIES MPS – electric chain stainless steel double link

Electric chain actuator projected with very small dimensions for use in concealed installations (inside frame) with a consequent fully disappearance. The use of this item is essential in residential constructions or buildings where also industrial design is a fact of primary importance. Particulary suitable for pivotel windows. Actuator movemented by a stainless steel double link chain put in a proper place inside the case. Push – pull force 200N.

Available in operating voltage 24V d.c. and 230V a.c.

Stroke 300mm

All fixing kits for top hung installation are supplied.

MPS USER MANUAL

POST SELL MANUAL

Select color and voltage to show the SKU

€0,00

Clear Selection
SKU: N/A Categories: ,

LINEAR ACTUACTOR: FOR LOUVRES, SKYLIGHTS AND DOMES

Chain actuator: for bottom hinged windows (hinges on the bottom side, inside opening); for top hinged windows (hinges on the top side outside opening)

Linear actuator: for louvres, skylights and domes

To calculate the window opening and closing force please refer to the following semplified formulas
remember that 1 N (Newton) is about 0.1 kg (kilograms)

Operating voltage24V d.c. and 230V a.c.
Available stokes300mm
Maximum tensile load200N
Maximum thrust load200N
Power15W – 20W
Travel speed without load9mm/s
Connection1200mm cable
Kind of serviceContinuous
Operating temperature-15° +45°
ProtectionIP32
Push points1
Electronic speed controlYes
Link adjustment of moving partNo (automatic)
Parallel connectionYes
End of strokeElectronic with current absorption
Dimension stroke 300mm29x42x335

ACTUATOR FORCE (F) FOR VERTICAL WINDOWS

Force calculation example

F = (WINDOW LEAF WEIGHT /2) X (ACTUATOR STROKE / WINDOW LEAF HEIGHT)

WINDOW LEAF WEGHT (P) = 100 kg

ACTUATOR STROKE (C) = 250 mm

WINDOW LEAF HEIGHT (H) = 1000 mm

THE REQUIRED FORCE (F) IS:

F= (P:2)X(C:H)

F= (100 : 2) X (250 : 1000) =

12.5 kg (125 N)

ACTUATOR FORCE (F) FOR HORIZONTAL WINDOWS

Force calculation example

F = WINDOW LEAF WEIGHT / 2

WINDOW LEAF WEIGTH (P) = 100 kg

THE REQUIRED FORCE (F) IS:

F= P: 2

F= 100 : 2 = 50 kg (500 N)

 

You may also like

Scroll to top