Series MPD – electric chain stainless stell double link <br> body length L=1610

Series MPD – electric chain stainless stell double link
body length L=1610

Aluminium bodied electric chain window opener with pivot bracket and selectable strokes, over the 5 standars selectable strakes supplied by factory, the motor is also equipped with an innovating function: the “U” position. This function allows the user to regulate a new needed stroke of chain in a range from 12 to 400 mm.

Actuator with stainless stell double link chain.

Available on 24V d.c. and 230V a.c. versions, force 400N, boby lenght 1610mm.

Dimensions 35x53x1610.

The motor is supplied with 1200mm of cable.

Supplied complete with pivot brackets.

The motor is also equipped with the safety function that reduce the force during the close operation in the last 5 cm.

MPD USER MANUAL

MDP AFTER SELL MANUAL

 

SELECT COLOUR AND VOLTAGE TO SHOW THE SKU

Clear Selection
SKU: N/A Categories: ,

LINEAR ACTUACTOR: FOR LOUVRES, SKYLIGHTS AND DOMES

Chain actuator: for bottom hinged windows (hinges on the bottom side, inside opening); for top hinged windows (hinges on the top side outside opening)

Linear actuator: for louvres, skylights and domes

To calculate the window opening and closing force please refer to the following semplified formulas
remember that 1 N (Newton) is about 0.1 kg (kilograms)

Opening voltage24V d.c. and 230V a.c.
Available strokes150 – 250 – 300 – 350 – 400 mm
Programmable strokes (“U” position)12 – 400 mm
Maximum tensile load400N
Maximum thrust load400N
Power20W
Time to travel (400mm)35s
Connection1200mm cable
Duty time20%
No load speed12 mm/s
Temperature range (°C)-15° +70°
ProtectionIP42
Push points2
Electronic control speedYes
SinchronisationYes (inside)
Link adjustment of moving partAutomatic
Parallel controlYes
Double insulationYes
Safaty functionYes

ACTUATOR FORCE (F) FOR VERTICAL WINDOWS

Force calculation example

F = (WINDOW LEAF WEIGHT /2) X (ACTUATOR STROKE / WINDOW LEAF HEIGHT)

WINDOW LEAF WEGHT (P) = 100 kg

ACTUATOR STROKE (C) = 250 mm

WINDOW LEAF HEIGHT (H) = 1000 mm

THE REQUIRED FORCE (F) IS:

F= (P:2)X(C:H)

F= (100 : 2) X (250 : 1000) =

12.5 kg (125 N)

ACTUATOR FORCE (F) FOR HORIZONTAL WINDOWS

Force calculation example

F = WINDOW LEAF WEIGHT / 2

WINDOW LEAF WEIGTH (P) = 100 kg

THE REQUIRED FORCE (F) IS:

F= P: 2

F= 100 : 2 = 50 kg (500 N)

 

YOU MAY ALSO LIKE...

You may also like…